2016年12月07日

The Common and different points of Double Slipper spring


 Common Points:

Double-eye and Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

Features:

  • Leaf spring acts as part of your trailer's suspension system

    • Provides attachment point for your trailer's axle



  • Multiple leaves allow flexibility to absorb road shock

    • Allows for a smooth ride

    • Reduces wear and tear on trailer

    • Ensures level ride on bumpy and uneven surfaces



  • Sturdy steel construction

  • Nylon bushings included


Diffent points

1.Double-eye leaf spring:

  • Pre-mounted hangers or aftermarket hanger kit  required for installation

    • Spring attaches to hanger mounted on trailer frame at one end

    • Other end connects to shackle straps suspended from hanger or equalizer




2.Slipper leaf spring

Pre-mounted hangers or aftermarket hanger kit  required for installation

  • Eye of spring attaches to hanger mounted on trailer frame

  • Slipper end slides into hanger or equalizer


So get a set of Double-eye leaf spring or Slipper leaf spring  for your,pleaf send email : info@newtruckspring.com for us

Popular Replacement Leaf Springs


1.UNA034 Double-Eye Trailer Leaf Spring

2.UNA041 Double-Eye Trailer Leaf Spring 25.13″ Long

3.UNA142 Double-Eye Trailer Leaf Spring 27″ Long

4.TRA2727 Slipper Spring w/ Radius End 43-4/5″ Long

5.TRA-693 Slipper Spring w/ Radius End 40.19″ Long  


Posted by Newtruckspring.com - suspension parts at 17:06Comments(0)coil spring

2016年12月02日

Replaces Suspesion parts for the popular toyota tacoma

Unfortunately, the leaf springs on Toyota Tacoma's tend to ware out, crack, and break. Whether it is because of the factory spring construction or the amount of use the trucks get by their active owners, the broken springs need to be replaced. If your tacoma leaf spring needs new suspension parts you're in the right place. We offer right and left springs separately, as they are sometimes different in tacoma's to compensate for driver-side only traveling as well as fuel tank weight. However, the difference is normally only in the arch and is negligible in certain cases where springs are superseded and will fit with parts like this tacoma shackle.

Tacoma has been around for so long it often becomes necessary to replace worn suspension parts as part of a routine maintenance. Keeping your suspension working properly is crucial to not only having a smooth ride as you go over bumps and imperfections in the road, but it is also important to maintain the load capacity of your truck and prevent damage to the chassis.

Finding the Right Product is a Matter of Concern

Since the Tacoma has been around for so long, it’s no surprise that the model design has changed from time to time, including the fit of the suspension system on the truck. In fact, the leaf springs alone have changed five times for the Toyota Tacoma, so it’s important that you get the right leaf springs for your particular model. The five model year groupings are:

1. 1995-1997
2. 1998-2000
3. 2001-2004
4. 2005-2011
5. 2012-2014

On top of the model year, the specific model of truck will also dictate what leaf springs you need. For instance, in the 1995 – 1997 models, there are four types of rear wheel leaf springs available: the factory default 4 X 4 with 4 leaves, heavy-duty 4 X 4 with 4 leaves, the factory default 4 X 4 with 3 leaves, and the 2-wheel drive model with 3 leaves. So, as you can see knowing the model of your Toyota Tacoma is an important factor when choosing proper suspension parts.

What are some of the most popular leaf springs for the Toyota Tacoma?

1.2005-2011 Toyota Tacoma Prerunner 2wd 2/1 Leaves

2.1984-1988 Toyota Pickup and Chassis Cab 4wd 3/1 Leaves

  


Posted by Newtruckspring.com - suspension parts at 19:45Comments(0)coil springsuspension parts